Optical Fiber Ribbon Machine – Bear This In Mind..

An optic cable consists of optical fibers and it’s used in a great deal of applications such as telephone, internet and cable television. The cables are produced from different materials such as plastic, glass or both. The material used depends on the intended us.

Steps to make the cables. To make the cables you must have the necessary raw materials. For example, you need to have plastic or glass. You also need to possess the cable making machine. To create the Optical Fiber Ribbon Machine you should start by heating your raw materials (glass or plastic) at ultra high temperatures and then draw fibers at very high speeds (66 feet per second). When drawing the fibers you need to monitor them using mirometer. This really is to make sure that the diameter is uniform from the beginning to end.

For the fibers to send out data over long distances you should ensure that they are highly reflective. It is simple to accomplish this by developing a mirror effect inside the fiber. You do this by passing the fibers through ultraviolet ovens and coating cups.

When you have your reflective fiber with you, you ought to subject it to a number of tests to ensure that it’s in top condition. A number of the tests that you ought to subject it to include: refractive index profile, tensile strength, bandwidth, fiber geometry, attenuation, temperature dependence, operating temperature, and ability to conduct light underwater.

It’s only right after the fibers have passed these tests in the event you package ensemble them in a cable. You could make a cable with one fiber strand or with numerous strands. Everything depends on the application. To assemble the cable you have to surround the fibers using a loose tube of PVC. This really is to ensure there exists enough room for your SZ Stranding Line to bend when being routed around corners.

You should then cover the loose PVC having a layer of aramid yarn. The main function of the layer is always to absorb shock. Finally, you need to seal out moisture by installing an outer PVC jacket. For the optic cable to deliver data you should connect it to optical transmitter and receiver. The transmitter converts analog and electrical signals into linear modulating light signals. The optical receiver on the contrary accepts the sunshine signal and reformats the data to the original form.

To create good quality and marketable optic cables you should have a top quality optic cable machine. We sell a wide range of Optic fiber cable equipment including Secondary Coating Line that helps you to make good quality fibers. We have a piece of equipment that will assist you to make high quality SZ stranding line

Cleanliness is of great importance to optic fibers. During installing of the fibers, you ought to pay close attention to cleanliness. In accordance with experts, even minor dirt on the units can prevent them from running efficiently. Due to this, you need to ensure that no dirt gets on the fibers. To help keep the units clean you need to regularly clean these with specialty kits designed uxenwa the job. For additional information about fiber optic fibers like information regarding CWDM networks you need to highly consider visiting us. We also have a lot of information about DWDM networks. Check out the given links to find out more.


Leave a Reply

Your email address will not be published. Required fields are marked *