Stainless Steel Bollard Covers – Learn More..

Creating harmony in the midst of heavy foot or vehicle traffic is fairly tough, especially if you own a commercial building. This is often an issue in shopping malls, restaurants, or other crowded places, which explains why certain regulations are necessary for a more organised operation. But apart from these rules, additionally it is essential that you give people some visual signs of what these rules are, as stainless bollards so people will be made aware there are rules to be followed.

Bollards in Public Places – Bollards are generally found in public areas, and you may find parking bollards in streets with heavy traffic or before buildings that require defense against vehicles. Some are even used as an alternative to cycle racks. Others would even allow these bikes to become locked for security purposes.

When bollards are installed, it really is mainly to reinforce safety. They are visual indicators that no unauthorised individual is able to enter a place, that is often signified by adding a chain connecting the bollards. Because of this people are prohibited to get into the region that is certainly cordoned with bollards.

All steel bollards are galvanised to BS EN ISO 1461 and possess the option of powder coating for any BS or RAL colour. Mild steel tube is available in varying thicknesses 60mm approximately 114mm diameter possess a 3mm thick wall. Diameters above this are 5mm thick as standard. Mild steel tube is available in larger wall thicknesses to provide the greatest safety barriers.

Of suprisingly low maintenance, steel requires only occasional cleaning with tepid water and soap or perhaps a mild detergent. In heavy industrial areas or regions of a higher amount of traffic bollards may be subjected to more deposits, so that you can retain the desired finish a more frequent maintenance programme is usually recommended.

1-800-BOLLARDS

Areas requiring vehicle access throughout the day and demand a safe and secure area during the night can utilise a telescopic bollard. The bollards use a light lifting weight, approximately 15kgs, and retract to ground level permitting continued vehicle access. When the bollard is lifted and kept in place it provides high security for the area, this design may also be manufactured in a thicker steel wall to provide anti ram resistance.

There are numerous materials employed to make bollards. It can be stone, concrete or steel. Concrete bollards are permanently installed while steel bollards can be purchased with additional features, such as being sound sensitive or automated. Fixed bollards have light reflectors to permit people know where these are located, specially the drivers. Without the reflectors, they may easily cause accidents to occur inside the streets.

Installing bollards, whether they are utilized as a replacement for a bike stand or otherwise, depends upon which kind of bollards you might have chosen. Fixed bollards need to be installed into concrete or with new foundations. Factors miecfq as the soil condition and design have to be carefully examined at first.

On the other hand, removable or manufactured bollards often include their mounting systems. Even if they have to be mounted on their own, no drilling is essential to put in these sorts of bollards. They don’t need to be glued to the floor either with epoxy or similar materials.

Retractable bollards are also offered. At first, they may seem like layered telescopes which can be used with manual or automatic features, according to your preference. Manual bollards must be lifted with the aid of lift-assistance mechanisms while automated bollards use hydraulics and electricity.

Leave a Reply

Your email address will not be published. Required fields are marked *